Ocean Optics USB2000-FLG - Manual (Page 8)

1: Introduction
2 170-00000-FLG-02-201009
Ocean Optics USB2000-FLG Fiber Optic Spectrometer Typical Set-up
Features

Toshiba 2048-element linear silicon CCD array detector

Responsive from 380 to 1050 nm

Sensitivity of up to 130 photons/count at 400 nm; 60 photons/count at 600 nm

Fast 10 µs integration time for short fluorescence lifetimes

An optical resolution of ~10.0 nm (FWHM)

Integration times from 5 milliseconds to 60 seconds

EEPROM storage for
 Wavelength Calibration Coefficients
 Linearity Correction Coefficients
 Absolute Irradiance Calibration (optional)

Low power consumption of only 90 mA @ 5 VDC

16 bit, 3MHz A/D Converter

5 triggering modes

10-pin connector for interfacing to external products

CE Certification
System Requirements
You can use the USB2000-FLG’s USB connectivity with any computer that meets the following
requirements:
 Microsoft Windows – Windows 2000, XP; 32-bit and 64-bit
 Apple Macintosh – OS X version 10.0 or later