beautypg.com

Replacing the halogen bulb – Ocean Optics DH-2000-CAL User Manual

Page 27

background image

A: Maintenance

000-10000-030-02-1209

19

Replacing the Halogen Bulb

Note

You MUST recalibrate the lamp after replacing the bulb. See

Recalibration

for more

information.

1. Open the six slotted screws (14) and open the casing cover.

2. Remove the screw (21) with the tool (20) provided with the spare bulb (19).

3. Disconnect the old Halogen bulb from the connection plugs (18)

4. Open the screws of the cable-clamp on the lamp-side and remove the defective Halogen lamp

module.

5. Insert the new Halogen lamp module and replace the screw (21).

6. Reattach the two cables of the Halogen lamp module to the cable-clamp.

See also other documents in the category Ocean Optics Equipment: