Ocean Optics ADC1000-USB - Manual (Page 26)

Appendix A: Specifications
Pinouts
The following section contains pinout information for 15-pin Accessory Connector pinouts and 9-
pin Serial Connector pinouts:
15-pin Accessory Connector Pinouts
When facing the 15-pin Accessory Connector on the ADC1000-USB, the pins are numbered as:
Pin # Description Pin # Description
1 Single Strobe Output 9 Analog Channel 1 Output
2 Multiple Strobe Output 10 Ground
3 +5 VDC 11 Analog Channel 4 Output
4 External Hardware Trigger Input 12 Analog Channel 5 Output
5 External Synchronization Input 13 Strobe/Lamp Enable TTL Output
6 Analog Channel 7 Output 14 Analog Channel 3 Output
7 Analog Channel 6 Output 15 Analog Channel 2 Output
8 Software Trigger Input
9-pin Serial Connector Pinouts
When facing the 9-pin Serial Connector on the ADC1000-USB, the pins are numbered as:
ADC1000-USB Operating Instructions 23
Pin # Description Pin # Description Pin # Description
1 NC 4 NC 7 NC
2 Transmit 5 Ground 8 NC
3 Receive 6 Receive 9 NC