beautypg.com

Configuring the spectrometer, Open the spectrometer configuration screen, A/d interface tab – Ocean Optics ADC1000-USB User Manual

Page 15

background image

Using the ADC1000-USB: Serial Mode

Configuring the Spectrometer

The following section provides information on configuring your spectrometer and setting system
parameters:

Open the Spectrometer Configuration Screen

Select Spectrometer > Configure from the menu bar. The Spectrometer Configuration screen
appears:

A/D Interface Tab

Enter the same values as you did in the Configure Hardware dialog box (see the Configure the
OOIBase32 Software – Serial Port section for more information).

ADC1000-USB Operating Instructions

12

When you exit OOIBase32, this data is stored in the .spec file.

See also other documents in the category Ocean Optics Equipment: