Factory Direct Hardware Hansgrohe 10406001 Axor Starck X - Manual (Page 4)

4
• Seal the floor around the plaster shield with a
waterproof sealant compatible with the floor surface.
Lower the escutcheon to the floor
• Push the housing over the top of the tub filler. Tighten
the nuts.
• Install a black rubber hose washer in the short hose
end connection. Connect this end to the handshower
port on the bottom of the housing. Install the screen
washer in the long hose end connection. Screw this
end to the handshower. Lower the handshower into the
handshower holder on the side of the tub filler.
• Turn on the water and test all connections for leaks.