beautypg.com

Factory Direct Hardware Hansgrohe 10406001 Axor Starck X User Manual

Page 3

background image

3

Installation

If installing with Duravit Starck X tub, please see the

instructions st arting on page 5.

Cut the plaster shield on the rough-in 3/8" above the

finished floor.

Remove the flush block using an 8 mm allen wrench

(not included) to remove the 4 bolts. Do not

discard the bolts!

Install the tub filler to the rough. Slide the escutcheon

up and out of the way. Make sure that the unit is level

in all planes. Use the 8mm allen wrench to tighten

the bolts evenly.