dbx DriveRack PA2 - Manual (Page 53)

49
®
Factory Reset
The Factory Reset function resets all user presets and Utility settings in the PA2 back to their factory default state.
WarNiNg! Performing the Factory Reset procedure will permanently reset all user presets and set all PA2 settings
back to their factory default state. This operation is irreversible.
To perform a Factory Reset:
1� Power down the DriveRack PA2.
2� Press and hold the STORE button then apply power to the DriveRack PA2. Keep the button pressed until the “FACTORY
RESET Release STORE button” message appears in the LCD display then release the STORE button.
3� Press the WIZARD button to perform the Factory Reset procedure. Press the STORE button to cancel the operation.
Soft Reset
The Soft Reset function resets all Utility settings in the DriveRack PA2 back to their factory default state without resetting user
presets.
To perform a Soft Reset:
1� Power down the DriveRack PA2.
2� Press and hold the UTILITY button then apply power to the DriveRack PA2. Keep the button pressed until the “SOFT RESET
Release UTILITY button” message appears in the LCD display then release the UTILITY button.
3� Press the WIZARD button to perform the Soft Reset procedure. Press the UTILITY button to cancel the operation.