R&M Materials Handling WIRE ROPE PACKAGES - Manual (Page 23)

R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319
23/76
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
3.3 Machinery size 3, 4 wheels
8 Ø
c_ulgs01a
Pos. Name Specification Amount
1 End truck 2
2 Axle ILBD00-6 A 2
3 Traveling machinery 2
4 Washer 11DIN126-A3G 4+4
5 Socket head cap screw M10X35DIN933-8.8A3G 4+4
6 Split pin DIN1481-8X32 1+1
7 Crane power towing arm 1
8 Gear shaft
• Drill 8 mm hole for pin through gear wheel and traveling machinery shaft, use predrilled hole!
Install split pin!
• Do not fix axle to the idle wheel! Make sure that axle moves horizontally freely through gear
wheel!
• Remove the protection pin from the breather plug!