R&M Materials Handling WIRE ROPE PACKAGES - Manual (Page 22)

R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319
22/76
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
3.2 Machinery size 3, 8 wheels
1
c_usgs01a
Pos. Name Specification Amount
1 End truck 2
2 Washer 11DIN126-A3G 4+4
3 Socket head cap screw M10X35DIN933-8.8A3G 4+4
4 Traveling machinery 2
• Clean splines and mounting flanges from dirt and rust protection wax and grease the shaft lightly
before assembly.
• You can use a plastic hammer to slide drive in. Do not use any metal or lead hammer.
• Tightening torques M10-8.8 40 Nm
• Remove the protection pin from the breather plug.