R&M Materials Handling ELECTRIC CHAIN HOISTS LoadMate Chain Hoist LM 10 Stepless - Manual (Page 32)

LM10 STEPLESS I&M MANUAL/EN/11.30.2010
32/99
This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.
Copyright © (2010) R&M Materials Handling, Inc. All rights reserved.
7.5.2 Basic description
Table 4. Basic Description
Inverter The specific crane features for the inverter hardware and the special software are achieved by
combining the experience and know-how of crane applications with the latest technology.
Crane user interface Interface with pre-designed locations for typical crane functions. The main part of this interface
is carried out by a terminal strip, which has separated sections for signals with main, control
and electronics voltage levels.
Brake control Includes the brake contactor for disk brakes.
Electrical Braking Includes a braking transistor and a braking resistor.
Control methods Can be controlled by
the electronic potentiometer control with 2-step pushbuttons.
the multistep control with 2-step controllers.
the automation control using any control device with an 0-10V output (computer,
radio, PLC)
Limit switch functions Built-in slowdown stop limit switch (S12, S22) functions for both running directions.
Protections
Includes a motor thermal protection, which is based on motor temperature measurement by
Klixon placed in motor windings. A great number of other protections included are shown in the
technical data.
7.5.3 Main components
Table 5. Main Components
A1 Inverter
A3 Overspeed monitor
K1 Main contactor
K7 Brake contactor
T100 Control voltage transformer
G1 Rectifier
R1 Braking resistor unit
Z1, Z3 Ferrite rings (Depending on EMC level,
optional)
FU1 Filtering capacitors (Depending on
EMC level, optional)
X1 Terminals
Table 6. The Most Important External Components
M1 Hoisting motor
Y1 Mechanical brake
B5 Speed sensor
B6 Thermal sensor for motor protection
Control devices (switches, pushbuttons
etc.)
S11, S21, S12, S22 Limit switches