Prokit's Industries MT-7025 - Manual (Page 6)

6．MT-7025 transmitter instructions
1. RJ45 Socket
2. Wire finding and cable status
LED indicator
3. Function change button
4. Power and function switch
(SCAN/OFF/TEST)
5. Cable test verify LED
indicator
6. Cable mapping LED
indicators
7. Alligator cable
8. RJ11 cable
 RJ-11 cable, for telephone line test
 Alligator connector cable, red and black for telecom cable test,
Caution:
Never connect to live cable that has over AC14V or DC10V.
 RJ45 socket for test STP/UTP patch cord or network.
 Power and function switch
 TEST: For cable mapping and open/short test.
 SCAN: Transmit tone signal for cable finding.
 OFF: Power off
 Function change button
 Power and function switch in “TEST” position:
Press function change button shortly to change scan speed
from either slow or rapid.
Press function change button and hold for 2 seconds, when
“VERIFY” LED change from flash to light up then you can
process the telecom cable open/short test.
Alligator connector clip to 2 wires terminal, it can judge the
resistance is hi or low according to brightness of the number
“1” LED, more bright means low resistance, otherwise, the
5