Prokit's Industries MT-8002 - Manual (Page 3)

Warning
• Never use MT-8002 on circuits of more than 125V.
• Never use MT-8002 or test leads if they are damaged. Inspect the cases
and test leads for damage before use.
• Disconnect unused test leads and connectors from the MT-8002 when
testing telephone circuits.
• Never open the case except to change the battery or the fuse; no
user-serviceable parts are inside.
• Disconnect all test leads before replacing the battery.
• Use only 1.5V batteries, properly installed in the case, to power MT-8002.
• If this equipment is used in a manner not specified by the manufacturer,
the protection provided by the equipment may be impaired.
Safety Information
Read First Before Use
Table 1 describes the international electrical symbols used on the tester and in
this manual.
Table 1. International Electrical Symbols
Warning: Risk of personal injury. See explanations in the manual.
Caution: Risk of damage or destruction to equipment or software. See
explanations in the manual.
Warning: Risk of electric shock.
Please keep eye on the status or function of the equipment while
operating.
See Manual for details
Conformité Européénne