Prokit's Industries MT-8002 - Manual (Page 2)

Thanks for purchase MT-8002 Test set. Before using MT-8002 test
set, please read this page and the Safety Information carefully.
No part of this publication may be reproduced, stored on a retrieval system, or
transmitted, in any form or by any means electronic, mechanical, photocopying,
recording, or otherwise, without the prior written permission of Indus-
tries. The use of trademarks or other designations is for reference purposes only.
NOTICE
Industries makes no warranties about this document. In-
dustries reserves the right to make hardware and software changes to the
product described within this document without prior notice and without obligation
to notify any person of such revision or change.
TRADEMARKS
is a registered trademark of Pro’sKit Industries.
REGULATORY INFORMATION
WARNING:
This equipment generates, uses, and can radiate radio frequency energy,
and, if not installed and used in accordance with the installation manual,
may cause interference to radio communications. It has been tested and
found to comply with the limits for a Class A digital device pursuant to
Part 15, Subpart J of the FCC rules, which are designed to provide reason-
able protection against such interference when operated in a commercial
environment. Operation of the equipment in a residential area is likely
to cause interference, in which case the user, at his own expense, will be
required to take whatever measures may be required to correct the inter-
ference.