Prokit's Industries MT-8002 - Manual (Page 12)

1
3. Once the incoming or outgoing number is reached, press LNR key to
make a phone call.
4. To make a auto speed scroll press the or key for 3 seconds.
• Pre-dial function
As with a cell phone, user can input the phone number at on-hook status
then press LNR to send out the number to make a phone call. It is easy to
correct the wrong input in this mode.
• DEL key
In setting mode DEL key is used to quit setting mode. In pre-dial mode DEL
key is used to delete the last digit. In call in/dialing out list, press DEL will
delete a phone number and press DEL key for 4 seconds will erase all of the
number in the list.
• Brightness level adjuyst
Press key in on-hook mode to adjust the brightness level of LCD. There
are 5 levels to be selected.
• New and REP display
The “NEW” will be displayed on LCD when a new incoming number is not in
the call list, otherwise the REP will show on LCD.
• Off-hook
• Volume level adjust
Press key in off-hook mode to switch the volume level. There are 2 level
can be selected.
• Inquire incoming/dialing out call list
To inquire a incoming number just press / key. To inquire a dialing out
number by press OUT key. The others operation are same as oh-hook mode.
• Memory function
• Store a number
Phone number + STO + N (N=0~9, , # or M1)
• Dialing out a stored number
RCL + N (N=0~9, , # or M1)
• Phone number can be pre-dialing number or inquired from incoming/dialing
out list.
• Press M1 twice or press M1 + LNR or press Off hook + M1 will also dial out
the number stored in M1.
•
Telephone line polarity test
• Connect the telephone line to the Standard alligator clip.
• Off-hook the phone
• If the TEL+ LED is light, the red alligator clip is connected to the + line.
• If the TEL- LED is light, the red alligator clip is connected to the - line.