Prokit's Industries MT-1860 - Manual (Page 3)

2
General
MT-860 endowed with the key touching function instead of the traditional mechanical
knobs, is a new type of 3 5/6 digital multimeter equipped with the LCD display device
with the text height of 33mm which has the merits of visual display, easy operation, stable
performance and high reliability. It can be used to measure DC voltage, AC voltage, DC
current, AC current, resistance, capacitance, frequency, temperature, diode and make
on-and-off test. Meanwhile, it is available for unit symbol display, data retention, the mea-
surement of maximum and minimum value, automatic/manual range switching, automatic
power off and alarm function. The complete machine takes a switching integrated circuit
which can directly drive LCD microprocessor and double-integrating A/D and a digital
display drive offering high resolution and high precision. Due to it’s complete functions,
high measurement accuracy and convenient operation, the multimeter is the ideal tool in
laboratory and factory as well as for radio fans and family.
Open-package Inspection
Open the package box and take out the meter, check carefully if the following accessories
are absent or damaged. If there is any absence or damage, please contact the distributor
immediately.
Digital Multimeter
PC
Instruction Manual copy
Test Leads pair
Temperature Probe (K-Thermocouple) PC
PC Interface Cable PC
Software Disk PC
Holster PC
Safety Note
In accordance with IEC00 clause (the safety standard issued by International Elec-
trotechnical Commission), MT-860 is designed and produced according to the safety
requirements of pollution level II.
Warning:
In order to avoid endangering the operator’s safety, prior to the operation of the instru-
ment, please read the instruction manual carefully, and conform to the safety warning
information and operation instruction strictly to use the instrument.
. When voltage above 30V, current above 0mA, AC power line with inductive load or
power line during electric fluctuation is measured, please beware of electric shock.
2. Prior to measurement, check if the measurement function is in conformity with the