KIA Magentis 2006 - Manual (Page 130)

4-51
AIR CONDITIONING
(IF EQUIPPED)
All Kia Air Conditioning Systems are
filled with environmentally friendly
R134a refrigerant which is not damaging
to the ozone layer.
1. Start the engine. Depress the air
conditioning switch.
2. Set the mode selection switch to the
face position.
3. Set the air intake control switch to
the outside air or the recirculated air
position (switch indicator ON).
4. Set the temperature control knob (or
switch) to the desired position.
5. Set the fan speed control knob (or
switch) to the desired speed.
6. Adjust the fan speed control knob (or
switch) and temperature control knob
to maintain maximum comfort.
• If warmer air is desired at floor level
for bi-level operation, set the mode
selection switch to the position
and adjust the temperature control
knob (or switch) to maintain maximum
comfort.
• When maximum cooling is desired,
set the temperature control knob (or
switch)to the extreme left position
and set the air intake control switch
to the recirculated air position
(switch indicator ON), then set the
fan speed control knob to the highest
speed.
✻ NOTICE
When using the air conditioning
system with high outside air tem-
peratures, monitor the temperature
gauge closely while driving up long
hills or in heavy traffic. Air condi-
tioning system operation may cause
engine overheating. Continue to use
the blower fan but turn the air con-
ditioning system off if the tempera-
ture gauge indicates engine over-
heating.
MS-CNA-Eng 4(40~).QXD 7/25/2005 5:15 PM Page 51