KIA Magentis 2006 - Manual (Page 128)

4-49
AIR INTAKE CONTROL
This is used to select the recirculation of
inside air.
RECIRCULATED AIR
POSITION
when the air intake control switch is
depressed (Switch indicator illuminates),
almost all outside air flow into the
vehicle is shut off and air inside the
vehicle is recirculated.
This position can be used temporarily for
maximum heating or cooling (if
equipped with air conditioning) and to
help prevent undesirable outside air flow
into the vehicle.
Outside (Fresh) Air Position
When the air intake control switch is not
illuminated, air enters the ventilation
system from outside the vehicle. Use this
position for normal ventilation and
heating.
HEATING AND COOLING
SYSTEM OFF
Press the "OFF" button to stop the
operation of the heating and cooling
system.
AIR FLOW CONTROL
(MODE SWITCH)
The mode selection button controls the
direction of the air flow through the
ventilation system.
The air flow outlet port is same as manual
climate control system.
FACE POSITION
Air flow is directed toward
the upper body and face.
Additionally, each outlet can
be controlled to direct the air
discharged from the outlet.
(outlet port: , )
FACE-FLOOR
POSITION
Air flow is directed towards
the face and the floor. The
air to the floor is warmer
than the air to the face
(except when the
temperature control is set to
the extreme cold position).
(outlet port: , , )
FLOOR POSITION
Most of the air flow is
directed to the floor, with a
small amount of the air being
directed to the windshield
and side window defroster.
(outlet port: , )
B D
B C D
C D
MS-CNA-Eng 4(40~).QXD 7/25/2005 5:15 PM Page 49