beautypg.com

2 installing the microphone windscreen, 3 powering on, 4 powering off – Sena Bluetooth EXPAND v1.0 User's Guide User Manual

Page 7: 5 volume adjustment

background image

7

EXPAND

English

3.2 Installing the Microphone Windscreen
The microphone windscreen helps you to cut down

incoming microphone wind noise by protecting

the microphone from the wind and provide clearer

voice audio sound under the circumstances where

the winds be very strong. Insert the microphone

windscreen at the end of the left side of the

microphone as shown below.

3.3 Powering On
Press and hold the Center Button and the (+) Button

at the same time for 1 second to power on. The blue

LED turns on and you will hear ascending beeps and

Hello”.

3.4 Powering Off
Press the Center Button and the (+) Button

simultaneously (you don’t need to press and hold in

order for the system to power off). The red LED turns

on for about 2 seconds until it turns off completely

and you will hear “Goodbye” and descending beeps.
3.5 Volume Adjustment
You can easily adjust the volume by pressing the (+)

Button or the (-) Button. You will hear a beep when

the volume reaches maximum or minimum level.

The volume is set and maintained independently at

different levels for each audio source even when you

turn the headset off and on. For example, once you

set the volume for mobile phone handsfree, it will not

change even if you adjust the volume when you hear

Bluetooth MP3 music. So you can always maintain

the preferred optimum volume level for each audio

source.

This manual is related to the following products: