Sena Bluetooth EXPAND v1.0 User's Guide - Manual (Page 14)

EXPAND
14
5.2 Multipoint Pairing
Voice Prompt “Multipoint pairing”
Factory Default N/A
To go into multipoint pairing mode, press the (+)
Button or the (-) Button until you hear the voice
prompt, “Multipoint pairing”. Please refer to section
6.2 for details on multipoint pairing. If you press the
(+) or (-) Button, you can exit from the multipoint
pairing mode.
5.3 Phone Selective Pairing
Voice Prompt “Phone selective pairing”
Factory Default N/A
To go into phone selective pairing mode, press the
(+) Button or the (-) Button until you hear the voice
prompt, “Phone selective pairing”. Please refer
to section 7.1 for more details on phone selective
pairing. If you press the (+) or (-) Button, you can exit
from the phone selective pairing mode.
5.4 Media Selective Pairing
Voice Prompt “Media selective pairing”
Factory Default N/A
To go into media selective pairing mode, press the
(+) Button or the (-) Button until you hear the voice
prompt, “Media selective pairing”. Please refer
to section 7.2 for more details on media selective
pairing. If you press the (+) or (-) Button, you can exit
from the media selective pairing mode.
5.5 Assigning Speed Dial
Voice Prompt “Speed dial”
Factory Default N/A
Execute Tap the Center Button
1. To assign a phone number as a speed dial, tap the
(+) Button or the (-) Button until you hear a voice
prompt, “Speed dial”.
2. Tap the Center Button, and you will hear a voice
prompt, “Speed dial one” and “Phone connected”.
3. Tap the (+) Button or the (-) Button to select one
of three speed dial numbers and you hear a voice
prompt, “Speed dial (#)”.
4. Call a phone number you want to assign and you
will hear a voice prompt, “Save speed dial (#)”.
The phone number is automatically assigned to
the selected speed dial number. Then the phone
call will hang up before being connected.
5. To exit the menu, tap the (+) Button or the (-)