Sena Bluetooth EXPAND v1.0 User's Guide - Manual (Page 23)

23
EXPAND
English 10. INTERCOM
10.1 Pairing with Other Sena Expand
Headsets for Intercom Conversation
The Sena Expand can be paired with up to three
other headsets for Bluetooth intercom conversation.
1. Turn on the two Sena Expand headsets (A and B)
that you would like to pair with each other.
2. Press and hold the Center Button for 5 seconds,
then you will hear a mid-tone single beep and the
voice prompt, “Intercom pairing”.
3. Simply press the Center Button of any one of
the two headsets A or B (it doesn’t matter which
you choose.) and wait until the LEDs of both
headsets turn to blue and intercom connection is
automatically established. The two Sena Expand
headsets A and B are paired with each other for
intercom conversation. If the pairing process is not
completed within one minute, the Sena Expand
will return to stand-by mode.
A
C
B D
Pairing A & B
4. You can make other pairings between headsets
A and C, and between headsets A and D by
following the same procedure as above.
A
C
B D
A
C
B D
Pairing A & C Pairing A & D