Sena Bluetooth EXPAND v1.0 User's Guide - Manual (Page 21)

21
EXPAND
English 9. MOBILE PHONE CALL MAKING AND
ANSWERING
9.1 Mobile Phone Call Making and
Answering
1. When you have an incoming call, press the Center
Button to answer the call.
2. To end a call, press and hold the Center Button for
2 seconds until you hear a mid-tone single beep,
or wait for the called person to end the call.
3. To reject a call, press and hold the Center Button
for 2 seconds until you hear a beep while the
phone is ringing.
4. There are several ways to make a phone call:
- Enter numbers on your mobile phone keypad
and make a call. Then the call is automatically
transferred to the headset.
- In stand-by mode, press and hold the Center
Button for 3 seconds, to activate the voice
dialing of your mobile phone. You will hear a
high tone single beep. Your mobile phone has
to support voice dialing. Refer to your mobile
phone manual for further instructions.
- To cancel voice dialing or redialing the last
number command, press the Center Button
while it is in progress.
If you have a second mobile phone connected with
the Sena Expand by multipoint connection, you can
answer the incoming call to the second mobile phone
by pressing the Center Button while you are on the
line of the first mobile phone. In this case, the first
call is on call waiting.
9.2 Speed Dialing
You can quickly make a phone call by using the voice
speed dial menu.
1. To enter into the voice speed dial menu, press
and hold the (+) Button for 3 seconds and you will
hear a mid-tone single beep and a voice prompt,
“Speed dial”.
2. Tap the (+) Button or the (-) Button to navigate
between the menus. You will hear voice prompts
for each menu item.