Non-security adapter bracket fasteners – Peerless-AV SAX772PU - Installation User Manual

Page 4

Text mode
Original mode

4 of 41

ISSUED: 01-25-12 SHEET #: 095-9370-6 09-20-13

Non-Security Adapter Bracket Fasteners

I.D. .34" (4)

(540-1059)

multi-washer (4)

(580-1398)

M5 x 12mm (4)

(520-1027)

M5 x 25mm (4)

(520-9543)

M6 x 12mm (4)

(520-1128)

M6 x 25mm (4)

(520-1208)

M8 x 25mm (4)

(520-1031)

NOTE: If mounting wall arm (A) to wood stud walls, slots on wall plate must align to wood studs.

Determine desired location of display center detailed in step 2.

Measure the distance from the center of wall arm (A) to desired display center. Loosen four phillips screws and
slide wall arm up to 4.5" left or right to align to desired display center. Retighten screws.

Do not adjust arm while display is attached.

Skip to page 6 for Concrete and Cinder Block Installation.

Optional Horizontal Adjustment of Wall Arm on Wall Plate

PHILLIPS SCREWS

FRONT PLATE NOT
SHOWN FOR CLARITY

WALL PLATE

WALL ARM

SLOT

M8 x 12mm (4)

(520-9571)