Warning – Peerless-AV SAX772PU - Installation User Manual

Page 13

13 of 41

ISSUED: 01-25-12 SHEET #: 095-9370-6 09-20-13

If more or less tension is desired in the arm pivot points, do the following:
• To increase tension, turn socket screw clockwise with 5mm allen wrench (J). NOTE: Tighten screws to
50 in • lbs (5.6 N.m.) maximum torque.
• To reduce tension, turn socket screw counter-clockwise with 5mm allen wrench (J). NOTE: Do not turn more
than half a turn.

TENSION SCREWS

TENSION SCREW

• Do not remove screw or loosen screw until it is no longer engaged with the mount. Doing so may cause the display

to fall.

• If screws become loose over time, tighten screws as necessary. Tighten screws to 50 in • lbs (5.6 N.m.) maximum

torque.

WARNING

All other brand and product names are trademarks or registered trademarks of their respective owners.

Peerless Industries, Inc.

2300 White Oak Circle

Aurora, Il 60502