Peerless-AV SAX772PU - Installation - Manual (Page 11)

11 of 41 ISSUED: 01-25-12 SHEET #: 095-9370-6 09-20-13
Remove button socket head screw with round plate
as shown in detail 3. Rotate display to desired position, then reinstall
socket head screw with round plate to lock down. 8-1
FRONT OF
DISPLAY
Install four portrait lock clips (E) to top and bottom rails with four M5 x 13mm self tapping screws (H) and four fl at
washers (I) as shown in detail 2. Tighten using allen wrench (M). Portrait lock clips must fi t snug against inside of
adapter brackets (B) as shown in fi gure 7.1. 7
• Portrait lock clips (E) must be securely installed to top and bottom rails against inside of adapter brackets (B).
Failure to place lock clips in correct location may cause injury.
WARNING
8
Optional Orientation Adjustment
DETAIL 3
BUTTON SOCKET HEAD SCREW
B
E
I
H
DETAIL 2
RAILS
E
E
B
fi g. 7.1
REAR OF
DISPLAY
BOTTOM RAIL
TOP RAIL