Peerless-AV LCFS-100S - Installation - Manual (Page 6)

ISSUED:02-25-03 SHEET #: 095-9149-3 08-11-04 6 of 6
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
©2004 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark and Vision•Point is a trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
This product is designed to accommodate screens with VESA ® 75 or 100 compliant hole
pattern. For safe mounting, please make sure that mounting screws turn at least three
complete turns in the screen inserts.
FOR VESA 75 MOUNTING PATTERN: 1.) Choose
hole pattern indicated below. 2.) Attach LCD
mount weldment (C) to back of screen using four
10 mm screws (G) as indicated below. 3.) If hole
pattern is in a pocket, attach LCD mount weldment
(C) to back of screen using four 20 mm screws (I)
and four retaining spacers (N) as indicated below.
Screen may appear
slightly different than
illustrated.
For screens with a hole
pattern in a pocket,
spacers (N) go between
adapter bracket (A) and
screen.
FOR VESA 100 MOUNTING PATTERN: 1.) Choose hole
pattern indicated below. 2.) Attach LCD mount weldment
(C) to back of monitor using four M4 x 10 mm screws (G)
as indicated below. Note: If installing LCD screen model
Sharp
® LC-13E1U, LC-15E1U, LC-20E1U, or if you don't
get three complete turns in the screen inserts, use four
M4 x 12 mm screws (H) instead of four M4 x 10 mm
screws (G).
cord management
hole
cord management hole
Run cords through cord management holes as shown.