Peerless-AV LCFS-100S - Installation - Manual (Page 5)

ISSUED:02-25-03 SHEET #: 095-9149-3 08-11-04 5 of 6
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
Slide LCD mount weldment (C) onto angled support tube
(F). Adjust viewing angle by swiveling LCD mount weldment
around support tube.
Insert angled support tube (F) into main support tube (D) in orientation shown. Adjust support tube (F) to the desired
height. IMPORTANT: In the highest position, the support tube (F) must be inserted at least 3-1/2" in the support tube
(D). Attach using two 1/4" set screws (K).
F
C
K
Swivel only up to
90° either way
F
C
Affix LCD mount weldment (C) to support tube (A)
using two 1/4" set screws (K).
TOP VIEW
D
F
K
INCORRECT CORRECT
• LCD Mount weldment (C) can be swiveled only up to 90°
on each side. DO NOT position LCD mount weldment (C)
past 90° on either side. This will cause the installation to
be unstable and may result in a hazardous installation.
WARNING