Peerless-AV SGLS01 - Installation - Manual (Page 5)

5 of 35 ISSUED: 07-28-06 SHEET #: 202-9156-14 (2013-10-01)
Loosely attach four 1/4-20 x 12 mm screws
(L) and 1/4-20 nuts (N) to shelf support (C).
Insert three button bumpers (K) into bottom of
shelf clamp bracket (D).
Attach shelf clamp bracket (D) to shelf support (C)
using two 1/4-20 x 20 mm screws (M) and two
1/4-20 nuts (N).
Insert six button bumpers (K) into shelf support
(C).
Place glass shelf (I) on shelf support.
2
L
C
N
Slide shelf support (C) onto upright (H) so that
1/4-20 nuts (N) slide into slots of upright (H) as
shown in fi gure 3 and detail 1. Slide shelf support
to desired position, level, then tighten 1/4-20 x 12
mm screws (L) using 4 mm allen wrench (R).
NOTE: Max of two shelves can be used
Max height of top shelf is 34" from base.
Max height of second shelf is 28" from base.
C
H
SLOT
fi g. 3
DETAIL 1
3
4 5
5-1
L
3-1
N
H
4-1
I
K
C
K
N
D
M
C