Peerless-AV PP730 - Installation - Manual (Page 5)

5 of 20 ISSUED: 10-01-07 SHEET #: 095-9272-5 09-02-11
fi g. 2.3
A or B
ADAPTER PLATE
Insert two M4 x 12mm screws (A) into top two
holes of display, leaving approximately 1/4" (6mm)
of exposed thread. Hook screws onto keyslots of
adapter plate as indicated in fi gures 2.1 and 2.2.
*NOTE: If hole pattern is in a pocket, insert two
M4 x 20mm screws (B) with two retaining spacers
(C) into top two holes of display as indicated right.
Insert two M4 screws (A or B) through bottom
holes of adapter plate as shown in fi gure 2.3.
2
fi g. 2.1
1/4"
fi g. 2.2
Display may appear
slightly different
than illustrated
C
*For displays with
a hole pattern in a
pocket, spacers (C) go
between adapter plate
and display.
A
FOR VESA ® 75
MOUNTING PATTERN:
FOR VESA 100
MOUNTING PATTERN:
Attaching Front Plate to Display Using VESA 75 or 100mm Mounting Patterns
ADAPTER
PLATE
• If screws don't get three complete turns in the display inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to display or product may fail.
WARNING