Detail 5 fi g 16.1, Adjusting the tilt angle of the flat panel display – Peerless-AV WL-ST660-200 - Installation User Manual

Page 13

13 of 14

ISSUED: 08-24-12 SHEET #: 180-9038-2 10-30-12

All other brand and product names are trademarks or registered trademarks of their respective owners.

DETAIL 5

fi g 16.1

IncreLok™

TILT

LOCKING

SCREW

LOCATOR

HOLE

RATCHET

HANDLE

TILT

POSITION

HOLES

For preset tilt angles use Increlok

™ and for

custom tilt angle use ratchet handle.

INCRELOK

™

: The display can be locked into a

pre-set tilt position of -5

, 0

, 5

, 10

or 15

. Use

locator hole to fi nd tilt position hole and tilt display
to align holes. Tighten IncreLok™ tilt locking
screws on both tilt brackets to lock tilt as shown in
detail 5.

Ratchet Handle:

Loosen ratchet handle (refer to

step 15 for tension adjustment of handle).

Push

or pull from top or bottom of display to adjust tilt
as shown in fi g. 16.1. The tilt can be adjusted to a
maximum of 15° forward or 5° backward.

Adjusting the Tilt Angle of the Flat Panel
Display

Plug extension cord into power source.

To complete the installation of your wireless mount, please refer to the HD Flow™ User's Manual and the HD
Flow™ Install Guide included.