Peerless-AV LCT-101 - Installation - Manual (Page 6)

6 of 7 ISSUED: 03-21-05 SHEET #: 090-9103-5 07-10-08
Snap plastic cap (C) into top of arm assembly
(B).
Place set screw (H) into the back of desk base
(A). Tighten with the M2.5 hex wrench (J).
H
A
J
7
C
B
Installing monitor
(Vesa 75 mm x 75 mm)
(Vesa 100 mm x 100 mm)
Mount the LCD monitor directly to the front plate of arm assembly (B) using the M4 x 10 mm phillips screws (V) or
M4 x 6mm phillips screws (U).
B
U or V
LCD MONITOR
• Do not tighten screws with excessive force.
Overtightening can cause damage to screen. Tighten
screws to 40 in. • lb (4.5 N.M.) maximum torque.
CAUTION
• It is important to always use the mounting screws
provided by the manufacturer of the LCD monitor.
CAUTION
8
9