Peerless-AV DS509 - Installation - Manual (Page 8)

ISSUED: 04-06-09 SHEET #:125-9059-3 07-11-11 8 of 9
4
Attaching Adapter Plate to Screen
Attaching adapter plate to dedicated adapter plates:
Using the hole pattern shown in detail 3, attach the adapter plate (B) to dedicated adapter plate with four
M10 x 15 mm screws (I) as shown in fi gure 4.2. Tighten screws using 6 mm allen wrench (not included).
DEDICATED
ADAPTER PLATE
VESA ® 200 x 100 VESA ® 200 x 200 VESA ® 100 x 100
MOUNTING PATTERNS
Attaching adapter plate to screen with VESA hole
pattern:
Choose hole pattern and fasteners shown in detail 2 for
mounting screen with VESA mounting patterns. Hand
thread screws (F, G or H) through washers (J or P) and
adapter plate (B) into screen as shown in fi gure 4.1. Screw
must make at least three full turns into the mounting hole
and fi t snug into place. Securely tighten screws.
• If screws don't get three complete turns in the
screen inserts or if screws bottom out and bracket
is still not tightly secured, damage may occur to
screen or product may fail.
WARNING
B
SCREEN
F, G
or H
J or P
DETAIL 3
DETAIL 2
MOUNTING PATTERN FOR
DEDICATED ADAPTER PLATES
fi g. 4.1
B
I
fi g. 4.2
M4 x 12 mm screws (F) with #8
washers (J) or M5 x 12 mm screws
(G) with 1/4" washers (P)
M4 x 12 mm screws (F) with
washers (J), M5 x 12 mm screws (G)
or M6 x 12 mm screws (H)
with 1/4" washers (P)
M5 x 12 mm screws (G) or
M6 x 12 mm screws (H) with
1/4" washers (P)