Peerless-AV HLG452-SM-Q10 - Installation - Manual (Page 5)

ISSUED: 08-25-09 SHEET #: 090-9189-6 07-31-12
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
5 of 7
DISPLAY MoDeL HoLe PAtteRNS
(4) # 10 x 3/8 phillips pan screws (self
drillers) ( G)
LN-T3253HTX
LN-T4053HTX
LN32A450C1HXZA
LN37A450C1HXZA
LN40A450C1HXZA
FRONT
SAMSUNG
LN-T2353HTX
LN-T2653HTX
LN22A450C1HX2A
LN26A450C1HX2A
(4) # 10 x 3/8 phillips pan screws (self
drillers) ( G)
FRONT
Note: Mounting hole bumpout must
be placed on bottom flush with
raised section on base.
Installation option 2 (Adhesive Strips)
Note: Display base stand and mounting
hole locations may appear different than
illustrated.
DISPLAY BASE STAND
A
1
RUBBeR Feet
Attach lock-down plate to display base bottom using
screws provided. Refer to page five for lock-down
plate/display base stand hole pattern.
Note: Remove existing rubber feet from display base
that interfere with the lock-down plate. Larger display
bases may require additional rubber pads ( F) to
provide additional support at the perimeter of the base.
SCREWS PROVIDED
LN32A650A1HXZA LN32B457C6HXZA
LN40A650A1HXZA LN37B457C6HXZA
LN46A650A1HXZA LN40B457C6HXZA
LN52A650A1HXZA
LN32B450C6HXZA