Peerless-AV PP730-S - Installation - Manual (Page 5)

5 of 20 ISSUED: 10-01-07 SHEET #: 095-9272-3 08-20-09
Insert two M4 x 12 mm screws (A) into top two holes of
screen, leaving approximately .25" (6 mm) of exposed thread.
Hook screws onto keyslots of adapter plate as indicated in
fi gures 2.1 and 2.2.
*Note: If hole pattern is in a pocket, insert two M4 x 20 mm
screws (B) with two retaining spacers (C) into top two holes of
screen as indicated right.
Insert two M4 screws (A or B) through bottom holes of adapt-
er plate as shown in fi gure 2.3.
2
fi g. 2.1
• If screws don’t get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to screen or product may fail.
WARNING
1/4”
fi g. 2.2
A
Screen may appear
slightly different
than illustrated
fi g. 2.3
A or B
ADAPTER PLATE
C
*For screens with
a hole pattern in a
pocket, spacers (C) go
between adapter plate
and screen.
FOR VESA ® 75
MOUNTING PATTERN:
FOR VESA 100
MOUNTING PATTERN:
Using VESA 75 or 100 mm Mounting Patterns
ADAPTER
PLATE