Peerless-AV PP730-S - Installation - Manual (Page 3)

3 of 20 ISSUED: 10-01-07 SHEET #: 095-9272-3 08-20-09
C
AA
B G A
Before you begin, make sure all parts shown are included with your product.
Parts may appear slightly different than illustrated.
E
I
Installation to Wood Stud Wall
• Installer must verify that the supporting surface will
safely support the combined load of the equipment
and all attached hardware and components.
• Tighten wood screws so that wall plate is fi rmly at-
tached, but do not overtighten. Overtightening can
damage the screws, greatly reducing their holding
power.
• Never tighten in excess of 80 in. • lb (9 N.M.).
• Make sure that mounting screws are anchored into the
center of the stud. The use of an "edge to edge" stud
fi nder is highly recommended.
• Hardware provided is for attachment of mount through
standard thickness drywall or plaster into wood studs.
Installers are responsible to provide hardware for
other types of mounting situations (not UL approved).
WARNING
Using a stud fi nder, locate and mark the edges of
the wood stud used in mounting this product. Use of
an edge to edge stud fi nder is highly recommended.
Use a level to draw a vertical line down the center of
the stud. Use wall plate as template to mark center
of holes along the vertical line. Drill two 5/32" (4
mm) dia. holes 2.5" (64 mm) deep. Attach wall arm
assembly (AA) to wall using two #14 x 2.5” fl at head
wood screws (D).
Skip to step 2.
1
D
WOOD STUD WALL
AA
H M
D F
Parts List
PP730 PP730-S
Description Qty. Part # Part #
AA wall arm assembly 1 095-P1630 095-4630
A M4 x 12 mm phillips screw 4 504-9013 504-2014
B M4 x 20 mm phillips screw 4 504-9020 504-2013
C retaining spacer 4 590-5005 590-5003
D #14 x 2.5" wood screws 2 520-1202 520-2165
E 5 mm allen wrench 1 560-9640 560-9640
F concrete anchors 2 590-0320 590-0320
G cable ties 1 560-9711 560-2004
H cable tie anchor 1 590-1290 590-1290
I 3/16" allen wrench 1 560-0071 560-0071
M 8-32 x 1/4" flat head screw 1 520-1622 520-2622