Peerless-AV HP432 - Installation - Manual (Page 7)

ISSUED: 08-1-12 SHEET #: 090-9125-10 7 of 6
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800 865-2112
SCREEn
D
Q
9
For installing screens with a VESA 200 x 100 hole pattern: Using the 4mm allen wrench (J), attach screen to
adapter plate ( D) using four M4 x 12 mm serrated socket pin screws (I) and four #10 SAE washers (Q) as shown
in figure 8.1.
For installing screens with a VESA 200 hole pattern: Attach adapter plate (D) to back of LCD screen using
four M6 x 12 mm socket pin screws ( R) as shown. Tighten M6 x 12 mm socket pin screws (R) using 4mm allen
wrench ( J) as shown in figure 8.2. The M6 x 12 mm screws (R) should be tightened to a minimum of three
complete revolutions into the threaded insert on the flat panel screen. If a minimum of three complete revolutions
cannot be completed, use the next largest available screw - M6 x 20 mm ( S), M6 x 30 mm (t).
fig. 9.1
R, S
or t
D
FOR SCREENS WiTH VESA 200 X 100 HOLE PATTERN FoR SCReeNS WItH VeSA 200 PAtteRN
SUPPoRtING SURFACe Not SHoWN FoR CLARItY
fig. 9.2
• Sharp ™ 45" LCD screen model LC-45GX6U • Use M6 x 30 mm socket pin screws ( t) in place of (R)
Model Hardware
• NEC ™ 40" LCD screen model LCD4000 • Use M6 x 12 mm socket pin screws ( R)
• Sharp ™ 32" LCD screen models LC-32GD4U, LC-32GD6U • Use M6 x 12 mm socket pin screws ( R)
LC-32D5U, LC-32D7U, LC-32GA5U
• Sharp
™ 37" LCD screen models LC-37GD4U, LC-37GD6U
LC-37D5U, LC-37D7U, LC-37GB5U
• Sharp
™ 32" LCD screen model LC-32G4U • Use M6 x 30 mm socket pin screws ( t) in place of (R)
• Sharp ™ 37" LCD screen model LC-37G4U
• Sharp ™ 37" LCD screen models LC-37HV6U and LC-37HV4U • Use M6 x 20 mm socket pin screws ( S) in place of (R)
• Do not overtighten! Overtightening may cause permanent damage to the screen. Torque to 26-35 in • lb (30-40 kg • cm).
WARNING
I
• If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not
tightly secured, damage may occur to screen or product may fail.
WARNING
© 2012 Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.