Peerless-AV ST16D - Installation - Manual (Page 8)

8 of 11 ISSUED: 09-15-05 SHEET #: 202-9031-3 08-18-11
To prevent scratching the screen, set a cloth on a fl at, level surface that will support the weight of the screen.
Place screen face side down. Attach the interface bracket of tilt bracket assembly (A) to the LC adapter plate (sold
separately) using four M5 screws provided with plate as shown.
2
Attaching LC Adapter Plate to Tilt Bracket Assembly
GENERIC LC ADAPTER PLATE
M5 SCREWS
Note: Refer to accompanying instruction sheet for attachment of adapter plate to screen before proceeding with step 2.
• Tighten screws so interface bracket is fi rmly attached. Do not tighten with excessive force. Overtightening can
cause stress damage to screws, greatly reducing their holding power and possibly causing screw heads to become
detached. Tighten to 40 in. • lb (4.5 N.M.) maximum torque.
WARNING
A
(NOTE: INTERFACE
BRACKET SHOWN
WITHOUT FULL TILT
BRACKET ASSEMBLY
FOR CLARITY)