Peerless-AV HLG440-LG-Q10 - Installation - Manual (Page 8)

ISSUED: 12-13-10 SHEET #: 090-9197-7 08-18-13
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
8 of 8
5
I
DISPLAY
DISPLAY BASE
Note: Display and base may appear
different than illustrated
Slide display onto base stand until display mounting holes and base stand mounting holes align as shown below.
Attach display to base stand using two M4 x 25 mm socket pin head screws ( G), two lock washers (J) and two
flat washers ( I) as shown. Tighten with 4 mm security allen wrench (K). Use display manufacturer's screws to
fasten remaining holes. Fasten one #8 sheet metal screw ( H) through display base and into desk surface.
J
G
DISPLAY BASE
H
© 2013, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.