Peerless-AV HLG440-LG-Q10 - Installation - Manual (Page 6)

ISSUED: 12-13-10 SHEET #: 090-9197-7 08-18-13
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
6 of 8
Use lock-down plate ( A) as a template to mark location of holes at point 1 and point 2, spaced 10.30" apart on
table. Drill two holes using a 9/32'' drill bit. Carriage bolts ( D) must be placed into slots as shown in
fig. 1.9 before mounting lock-down plate to display.
Mounting Pattern for Attaching to the Desktop: Models: 32LD333H, 55LV555H
1
A
D
Fig. 1.10
SLotS
10.30"
(261 mm)
Fig. 1.9
PoINt 1 PoINt 2
tABLe toP
Use lock-down plate ( A) as a template to mark location of holes at point 1 and point 2, spaced 6.03" apart
on table. Drill two holes using a 9/32'' drill bit. Carriage bolts ( D) must be placed into slots as shown in
fig. 1.11 before mounting lock-down plate to display.
Mounting Pattern for Attaching to the Desktop: Models: 37LD333H, , 37LT670H, 37LT770H
PoINt 1
PoINt 2
tABLe toP
Fig. 1.11 Fig. 1.12
SLotS
A
D
6.03"
(153 mm)
1
Four 10-32 X 3/8" undercut
flathead screw ( B)
One #10 X 3/8" undercut
flathead self drilling screw ( C)
Note: Do not over
tighten screws
Note: Must tighten first
32LD333H and 55LV555H 37LD333H, , 37LT670H and 37LT770H
Note: Do not over
tighten screws
Note: Must tighten second
Mounting Pattern for Attaching to the Display Base:
2