Introduction, Using your new peterson stroborack, Basic operation – Peterson VS-R StroboRack User Manual

Page 5

Introduction

The Peterson StroboRack

VS-R is a unique rack mount tuner with an unequalled real-time display and accuracy of 0.1 cent using Peterson’s exclusive Virtual

Strobe

™ Technology. It has a full complement of exclusive Sweetened Tunings

for guitar, bass, steel guitar and Dobro

and a wide range of classical

temperaments for other instruments. It is also a programmable tuner, allowing you to program up to eight of your own tempered tunings as well as giving you access
to 33 other preset temperaments and Sweeteners

. The StroboRack is the first tuner to offer inputs for instruments with mono, stereo and balanced signals (with

optional SR-EX module installed).
We strongly advise you to read this manual thoroughly to get the most out of your new StroboRack.

Using Your New Peterson StroboRack

The StroboRack accepts any voltage between 95 and 250VAC automatically; no adjustment is needed for operation with most global voltage standards. Simply use
a power cable with the correct power plug for your country or location.

Basic Operation

Using the included power cable, connect your StroboRack to a grounded A/C power outlet.

Connect a ¼” patch cord between the output jack of the StroboRack and the input jack of your amp or FX unit

Using a ¼” cord connect your instrument to the front input

…or rear input of the StroboRack. The front input overrides the rear input.
Remember to first activate the mute function to avoid possible noise while plugging in your instrument.