Peterson VS-R StroboRack - Manual (Page 23)

23
Setting up Presets on the Peterson StroboRack ™
In the StroboRack, a preset is a combination of a choice of Sweetener and Dropped tuning value. It’s possible to create a list of these presets which can be named
and recalled by hand or with the remote footswitch* in any sequence.
When a preset is activated, its name flashes briefly on the large center strobe display before reverting to the strobe image and tuning can commence.
To program a preset:
1. Press the Sweetener button and select the desired Sweetener. This can be one of the Peterson Sweeteners or a user-defined Sweetener setting.
2. Press the Drop button and Select the desired Drop Tuning setting (if required).
3. Press the Save button.
4. The Preset window appears showing the choices Delete (applies to last selected Preset), QUIT (to end the process without saving the preset), REPLACE
(applies to last selected Preset) and ADD to add the new preset to the list of existing ones.
5. Rotate the data wheel to highlight ADD.