Peterson VS-R StroboRack - Manual (Page 19)

19
DROP TUNING BUTTON
This allows the user to drop-tune the present tuning to anywhere.
Use the data wheel to enter the drop tune value; -1 means one half-step (semitone) down, -2 means two half-steps down etc.
SAVE BUTTON
The SAVE button gives the user access to the SAVE page. The data wheel allows the active parameters to be saved, deleted, replaced, added, or no action taken
(Quit).
AUDIO TONES
Audio reference signals are available from the Sound Out jack on the rear panel of the StroboRack TM . Plugging a cord with a ¼ inch (6.3mm) jack into the socket
activates the tone, which can then be plugged into any amplifier via the other end of the cord. Set the Auto/Man control to MAN and scroll through the notes using
the data wheel. Always set the amplifier’s volume to zero before plugging in. This signal can also be used to calibrate a software tuner like Peterson StroboSoft
TM ,
thus eliminating computer sound card errors.