Peterson VS-R StroboRack User Manual

Page 17

CHOOSING A PRESET MESSAGE FOR THE MARQUEE/SCREEN SAVER

1, Rotate the data wheel to

2. Press the wheel to view choices. The first is the strobe image. Selecting this means the image will track whether the tuner is

highlight the parameter.

muted or not. “STROBO” causes an immobile StroboRack logo to appear when the tuner is bypassed. “PRE NAME” causes the

current preset name to appear. “CUSTOM” causes whatever message the owner has programmed to appear .
Rotate the data wheel to highlight the desired image, then press to choose.

The scroll/ flash screen then appears. Rotate the wheel to choose between scrolling and flashing and press the SAVE button to save your choice to memory.

To view the result, ensure that the StroboRack

is unmuted (in bypass mode).

PROGRAMMING A CUSTOM MESSAGE FOR THE MARQUEE
After pressing the MENU button, rotate the data wheel clockwise to highlight “SCRN SVR” and press the wheel to reveal the SCRN SVR page. Rotate the wheel to
highlight “CUSTOM” and press the wheel to select it. The default factory setting “STROBE TUNING BY PETERSON” appears.
Now, as described in the section about naming Sweeteners

, rotate the wheel to select letters, numbers or spaces and press it to advance to the next

letter/number/space. Use the “

” character when you want the space after your message to truncate and loop back to the start immediately. When finished, press

the SAVE button. To activate the new message see CHOOSING A PRESET MESSAGE FOR THE MARQUEE above.