Peterson VS-R StroboRack - Manual (Page 24)

24
6. Press the data wheel to proceed to the renaming page.
7. Rotate the data wheel to name the preset (if not required, skip this step and proceed to step 8)
8. Press the Save button to save the preset and name.
*With optional SR-EX Expander only
Recalling Presets
Press the Preset button and use the data wheel to scroll through the presets.
If the SR-EX Expander is installed, connect a dual latching footswitch to the rear panel socket marked MUTE/PRESET. Engaging the right hand footswitch (or
whichever switch is connected to ring of plug) will advance the presets. When the footswitch is engaged, the name of the preset flashes briefly on the strobe screen
before reverting back to the strobe image.