Pace-Edwards BL Toyota Tundra StepSide - Manual (Page 6)

BEDLOCKER ® TOYOTA TUNDRA SS 6
Place the top cover on the canister opening and install the (2) Black Top Cover Screws into
the attachment blocks mounted to the inside of the canister.
Hold the top cover tight against the cab side of the box while tightening.
(The top cover can be adjusted slightly to align evenly with the ribbed blanket)
STEP 9: INSTALLING DRAIN TUBES
First ensure that the washer is in place on the drain tube end being inserted into the canister (This will prevent water
leakage).
With the cover opened, insert the drain tube fi ttings into the pre-drilled holes on the underside of the canister by
pushing them in place from under the canister. Drain tube should click into place.
Place the other end of the drain tube through the grommet or through the pre-drilled holes in the fl oor or the front
wall of the truck bed.
Washer
DRAIN TUBE FITTING
STEP 10: ATTACHING TOP COVER
HARDWARE USED:
BLACK TOP COVER
SCREW x 2
You have now completed the installation of your Bedlocker Electric hard tonneau cover. If you have any questions please
do not hesitate to call us at: (800) 338-3697 and ask for our technical service department.