Pace-Edwards Electric Retractable Utility Bed - Manual (Page 2)

TOOLS REQUIRED FOR ASSEMBLY:
BEFORE YOU START:
PACKAGING CONTENTS:
Electric Drill
1/4” drill bit,
1/2” drill bit
9/32 Allen Wrench
Read the instructions carefully before you start. If you have questions regarding the installation of your new Utility
Bedlocker™ retractable tonneau cover, please call our Technical Support Line at (800) 338-3697.
The Utility BedLocker electric retractable tonneau cover also offers
an optional wire harness (part # BL1120) to manually operate the
tonneau cover from inside the cab of your truck. This harness is
designed to plug into the custom-built electronics control box. See
Page 8 for installation instructions.
2 ELECTRIC UTILITY BED COVER INSTALLATION INSTRUCTIONS
7/16 Socket Wrench
Phillips screw Driver #1 & #2
Tape Measurer
Rubber mallet
OPTIONAL WIRING HARNESS for dashboard switch.
CANISTER
TOP
COVER
STANDARD
HORIZONTAL
RAILS
DRAIN TUBES
HARDWARE KIT PACK
RAIL CLAMP PACK
STANDARD
VERTICAL RAILS