B&B Electronics ES1AE - Manual - Manual (Page 19)

Configuring the IP Address
Manual Documentation Number ES1A -5012m pn6909-rev003 9
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
If you need to change the IP address of the ES1A, you can accomplish this
using the discovery software, or you can open the Web Configuration and
Management Interface and do it there. (See Configuring Network Settings
later in the next chapter.)
1. To change the IP address of the ES1A from the discovery software,
click Configure IP Settings.
2. In the dialog that appears, select Manually configure network
settings.
3. Type the new IP Address, Subnet Mask, Default Gateway and
system password (initially dbps) in the appropriate boxes, then click
Apply.
4. Click Reboot Device. This may take a minute or more to complete.
5. Click Refresh List to confirm the new IP address has been
accepted.