B&B Electronics 702M12-W - Manual - Manual (Page 40)

Revision 04062009 Page 40 of 52
NTP Client, Web Server, Telnet Server
NTP Client: The Network Time Protocol (NTP) is a protocol for synchronizing the clocks of computer
systems over packet-switched, variable-latency data networks. It can be used to set the N-TRON 702-W
internal clock.
Web Server: the following N-TRON 702-W Device Web Server parameters can be set:
Use Secure Connection (HTTPS): If checked Web server will use secure HTTPS mode. HTTP mode is
selected by default.
Secure Server Port: Web Server TCP/IP port setting while using HTTPS mode.
Server Port: Web Server TCP/IP port setting while using HTTP mode.
Telnet Server: the following N-TRON 702-W Device Telnet Server parameters can be set:
Enable Telnet Server: Enables Telnet access to the N-TRON 702-W Device.
Server Port: Telnet service TCP/IP port setting.
System Log: Logs system information locally and/or to a remote logging server.
Enable Log: Enables local logging for the device.
Enable Remote Log: Enables remote logging to a specified logging server.