B&B Electronics 1002MC-SX - Manual - Manual (Page 13)

(Revised 8/5/2009) 13
1002MC - KEY SPECIFICATIONS
Physical
Height:
4.0” (10.16 cm)
Width: 1.0” (2.54 cm)
Depth w/ typical SFP installed: 3.61” (9.165 cm)
Weight: 0.70 lbs (0.32 kg)
DIN Rail: 35 mm
Electrical
Input Voltage:
10-30 VDC (Regulated)
Input Current: 200mA max. @ 24VDC (Steady State)
Inrush Current: 13 Amp/0.8 ms max. @ 24VDC
Input Ripple: Less than 100 mV
Input Wire Size: 16-28 AWG
Environmental
Operating Temperature:
-40°C to 85°C
Storage Temperature: -40°C to 85°C
Operating Humidity: 10% to 90% (Non Condensing)
Operating Altitude: 0 to 10,000 ft.
Network Media
10BaseT:
> Cat-3
100BaseT: > Cat-5
1000BaseT: > Cat-5e
1000BaseSX Multimode: 50-62.5/125 µ m
1000BaseLX Singlemode: 7-
10/125μm
Connectors
10/100/1000BaseTX:
One (1) RJ45 TX Copper Port
1000Base-X SFP: One (1) SFP LC Duplex Gigabit Fiber Port
Recommended Minimum Wiring Clearance:
Front: 5” (12.70 cm)
Top: 1" (2.54 cm)