B&B Electronics RT3G-304B1003 - Quick Start Guide - Manual (Page 3)

Configure the Router
Select “T-Mobile UMTS” as the carrier for the
Primary SIM card.
For APN, type “grid.t-mobile.com” and Click
“Apply” to submit the WAN configuration.
3
Click “Mobile WAN” located under
Configuration.
You may configure the router via a web browser
or Telnet.
The default IP address is 192.168.1.1
Password = root
Username = root
When the page has updated it will display
information about the PLMN, which is the Roaming
Cellular Network it is attached to.
It will also display information about the signal
level of the cellular connection.
Note: If the PLMN and signal strength are not
shown, recheck the Mobile WAN configuration,
verify the connection of the antennas, and ensure
that the router or antenna is placed in a location
that provides an acceptable signal.
Note: The displayed Mobile Network Information
varies by provider and conditions.
Detailed cellular router configuration data is
included on your installation CD and also on our
website.
To verify connectivity, click “Mobile WAN” under
Status.
Note: This may take several minutes to update.