B&B Electronics 850-14400--15 - Manual - Manual (Page 5)

2
Managed Modules
The iMcV-DS3/E3/STS-LineTerm modules can be remotely managed when installed
in an iMediaChassis with an SNMP management module. For a managed an
environment, first manually configure the desired features through DIP Switch settings
to ensure that they continue to function if management is ever lost.
After the module is installed, modify the SNMP enabled features by using the iView 2
SNMP management software. In a managed chassis, the software settings take
priority over DIP Switch settings. Ensure the software settings match the desired
configuration requirements for the installation.
iView² Management Software
iView² is the IMC Networks management software designed specifically for the IMC
Networks “iMcV” family of modules. It features a GUI and gives network managers
the ability to monitor and control the manageable IMC Networks products.
iView² is available in several versions, including WebServer version 3.0, and can also
function as a snap-in module for HP OpenView Network Node Manager and other
third party SNMP Management software. For assistance in selecting the right version
of iView² for your operating system, please visit:
http://www.imcnetworks.com/products/iview2.cfm
iView 2 supports the following platforms:
• Windows 2000
• Windows XP
• Windows Vista
• Windows 7
In addition, there are Java versions of iView² for any Java-capable operating systems
such as Linux.
Please see the SNMP Management Module installation guide for software
configuration options.
Unmanaged Modules
Before installing the module in an unmanaged chassis, manually configure all of the
desired DIP Switch selectable features.